DataTrak Controls and Indicators
DataTrak Controls and Indicators
Key
AA Runaway Limit, in cycles per minute (user settable; 00=OFF)
AB Displacement (user settable)
AC Flow Rate Units (user settable to 
/min, gpm [US],
gpm [Imperial], oz/min [US], oz/min [Imperial], l/min, or cc/min)
AD LED (fault indicator when flashing) AE Display
PF Prime/Flush Key (Enables Prime/Flush mode. While in Prime/Flush mode, runaway protection is disabled and the batch totalizer [BT] will not count.) LED will flash while in Prime/Flush mode.
RK Reset Key (Resets faults. Press and hold for 3 seconds to clear the batch totalizer.) Push to toggle between flow rate and cycle rate.
CF Cycle/Flow Rate
BT Batch Totalizer (resettable) GT Grand Totalizer (not resettable)
AE, see details at right
RK
GT
Run Mode
PF
ti8622b
CF | BT |
AD | TI11883a | Setup Mode |
|
AC
AB 
RK |
|
|
| PF |
|
|
| ||
| ||||
|
| ti8623b | ||
AA
Fig. 1. DataTrak Controls and Indicators
6 | 313840G |
