Accessories
Accessories
Restrictors
15E372 0.018 in. Orifice Restrictor
15E373 0.024 in. Orifice Restrictor
15E374 0.032 in. Orifice Restrictor
15E375 0.040 in. Orifice Restrictor
15E376 0.062 in. Orifice Restrictor
15E377 0.094 in. Orifice Restrictor
249765 Restrictor Kit
Includes one each of restrictor sizes 0.018, 0.024, 0.032, 0.040, 0.062, and 0.094 in., one plug with no restriction, package of 10 screens, and package of 6
15E370 Plug
Fits restrictor port, but with minimal restriction. Uses 249036
249036 Restrictor
Package of 6.
249037 Restrictor Screen Kit
40 mesh. Package of 10.
15K652 PTFE Night Cap
Partially fill with ISO pump oil or ISO pump grease to protect outlet manifold (6) from air and moisture.
217374 ISO Pump Oil
1 pint (0.5 liter) container.
106565 ISO Pump Grease
14.6 oz (0.4 kg) cartridge
255247 Ratio Check Nozzle
Use with retainer nut 512292.
246385 Pump Inlet Strainer
Use to strain material before it enters proportioner.
Gun Length Reduction
To reduce the overall length of the gun from 47 in.
(1194 mm) to 24 in. (610 mm), purchase two of each of the following fittings: 503279 and 151243. Use these fit- tings to replace fittings (4) and tubes (5).
Standard Disposable Mixer
512289† 1/2 in. (13 mm) ID x 5/8 in. (16 mm) OD x 30 element.
Alternate Disposable Mixers
120042 1/4 in. (6 mm) ID x 3/8 in. (10 mm) OD x 24 element; package of 50.
512014 1/4 in. (6 mm) ID x 3/8 in. (10 mm) OD x 32 element.
512016 3/8 in. (10 mm) ID x 1/2 in. (13 mm) OD x 24 element.
512017 3/8 in. (10 mm) ID x 1/2 in. (13 mm) OD x 30 element.
551979† 1/2 in. (13 mm) ID x 5/8 in. (16 mm) OD x 36 element.
512291 Retainer Nut for 1/2 in. (13 mm) OD and smaller mixers.
512292† Retainer Nut for 5/8 in. (16 mm) OD mix- ers.
Use retainer nut 512291 for 1/2 in. (13 mm) OD and smaller mixers.
†Use retainer nut 512292 for 5/8 in. (16 mm) OD and smaller mixers.
14 | 332198C |
