Storage

Cleaning Sprayer Exterior

Wipe paint off outside of sprayer using a soft cloth moistened with water or flushing fluid.

Do NOT submerge the sprayer.

Tips

Tips will require replacement depending on abrasiveness of paint.

Do not spray with worn tip. See Troubleshooting, page 20.

Storage

3.Reverse spray tip to UNCLOG position, put prime/relief valve DOWN to spray position, and aim sprayer into waste area. Pull trigger for 1-2 seconds.

4.Properly dispose of used Pump Armor mixture from material cup and rinse cup with water.

NOTICE

Failure to store with sprayer with Pump Armor will result in operational problems the next time you spray. Always circulate Pump Armor through the sprayer after cleaning. Water left in the sprayer will corrode and damage the pump.

1.Dilute 4 oz. bottle of Pump Armor Concentrate with an additional 4 oz. of water in material cup.

4oz

2.Thread cup into sprayer, put prime/relief valve to UP position and squeeze sprayer trigger for approxi- mately 10 seconds.

5.Store sprayer indoors in a cool, dry place. Store in an upright position only.

NOTE: For prolonged battery life, lithium batteries should be stored at half charge in an environment below 90° F (32° C).

3A0153E

15

Page 15
Image 15
Graco 258859, 258865 important safety instructions Storage, Cleaning Sprayer Exterior, Tips