Unclogging Spray Tip/Guard Assembly
Unclogging Spray Tip/Guard Assembly
4.Engage trigger lock. Put prime/relief valve UP to release pressure and rotate spray tip back to SPRAY position.
Do not operate or spray near children. Do not aim the sprayer at, or spray any person or animal. Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with any part of the body.
Occasionally, debris from material can accumulate and clog the spray tip. Perform the following steps to unclog the tip.
1.To unclog tip obstruction, engage trigger lock and pull relief valve UP to release pressure.
ti14994a
ti14999a
5.Disengage trigger lock, put prime/relief valve DOWN to spray position, and resume spraying.
ti14995a
ti15425a
6.If tip is still clogged, you may have to repeat steps 1 - 5 and rotate the tip from SPRAY to UNCLOG several times. Repeat step 1 to release pressure, remove and clean filter, or replace with new tip assembly.
ti14994a | ti14999a |
2. Reverse spray tip to UNCLOG position.
ti14991a
3.Aim sprayer at waste area, disengage trigger lock, and put prime/relief valve DOWN to spray position. Pull trigger to clear clog.
ti14995a
ti15425a
ti14989a
NOTE: Filter assembly is
7.If obstruction is cleared, engage trigger lock and rotate
ti14994ati14985a
3A0705E | 13 |
