Setup
Flushing the gun
Flush the spray gun before putting any paint through the gun.
WARNING
Read warnings, page 3. Follow Top and bottom feed guns installation, page 8.
1.To flush the gun, use a solvent that is compatible with paint to be sprayed. Hold a metal part of the gun firmly to a grounded metal pail. Trigger the gun to flush solvent through gun.
Setup
3.Install an air filter (G). See FIG. 1.
4.Use a 5/16 inch (7.9 mm) I.D. air hose to minimize excessive pressure drop in the hose.
5.Connect the air hose (D) to the 1/4 npsm gun air inlet (C).
C
D
ti4837a
FIG. 3
ti4836a
FIG. 2
Connecting the air line
2. Install an air pressure regulator (F). See FIG. 1.
6.Connect the other end of the air hose (D) to a regu- lated air supply line.
D
ti4838a
FIG. 4
310692C | 9 |
