6.0How to Install the Infant Restraint/Base
6.1Installing the Infant Restraint Without
Base Using Vehicle Belt
You must carefully follow the instructions provided by your vehicle manufacturer, in addition to the information in this manual. Before proceeding be sure you have read and understood section 4, “Choosing an Appropriate Vehicle Seat Location” on pages
Make sure the buckle tongue goes into the correct
buckle . The seat belt should not be twisted or turned.
Make sure vehicle is on level ground | |
so that the level indicator can be used to | |
properly recline the infant restraint. |
|
Refer to your vehicle owner’s manual and the instructions in “4.2.2 SAFE Vehicle Belt
Systems”, page
If a front passenger seat is used (see air bag warning, page 4), slide the vehicle seat rearward as far as possible from the dashboard. If a rear seat is used, make
sure the seat in front of it is moved forward enough and is upright enough to allow room for the infant restraint.
26
