1.Place the infant restraint without base in a
2.Thread the lap belt or lap portion of a lap/shoulder belt under both vehicle belt hooks:
Lap Belt | Lap/Shoulder | |
Belt | ||
|
3. Buckle the vehicle belt.
4. Tighten the vehicle seat belt. To create a secure installation, push down hard with your free hand on
the infant restraint and pull and tighten the vehicle belt.
5. Check infant restraint is level: Red level
line on the warning label MUST be level with the ground .
6. Test infant restraint for secure installation as described in infant restraint “Final Safety Check” page 41.
27
