Graco 35 LX manual Installing the Infant Restraint Base Using Vehicle Belt

6.2 Installing the Infant Restraint and

Base Using Vehicle Belt

1. Make sure vehicle is on level ground in	™
order to get the correct recline position ™.

2.Place the base in a rear-facing

position on a forward-facing vehicle seat.

3. When using the base to install the infant

restraint, the lock-off is ALWAYS used to
secure both belts of the lap or lap/shoulder
belt.
Open the lock-off and route the vehicle belt
through the vehicle belt path and over the	Lock-off
lock-off š. Buckle the vehicle belt.		š

4.Make sure the buckle tongue goes into the correct buckle ›. The seat belt should not be twisted or turned.

Lap Belt	Lap/Shoulder
	Belt
	Belts MUST go
	under lock-off

™›

28