Graco 35 LX manual Adjusting Handle, Removing and Attaching Infant Restraint

5.1 Adjusting Handle

1.Press handle adjustment buttons on both sides of handle

2.Rotate handle until it clicks into any of the

4 positions:

Position A: MUST be used when carrying by handle,

Position A,B,C,D: may be used in vehicle.

BOTH handle adjustment

buttons must pop out to lockCarrying A handle in place š.

3.Push and pull on the handle

to be sure it is locked firmly in position.

™.

™

B š

C

Sitting D

5.2 Removing and Attaching Infant Restraint

To remove, squeeze release handle at back of
	›
infant restraint and lift out of base as shown ›.

To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.

23