Setup
1.Connect Graco airless hose to sprayer. Tighten securely.
ti22219a
2. Connect other end of hose to gun.
ti22217a
3. Tighten securely.
ti22218a
4. Remove tip guard.
ti2769a
5. Check inlet strainer for clogs and debris.
ti5301a
Setup
6.Fill throat packing nut with TSL to prevent premature packing wear. Do this each time you spray.
ti5735b
7. Turn power OFF.
ti5316a
/.
/&&
8.Plug power supply cord into a properly grounded electrical outlet.
ti2810a
9. Turn prime valve down.
ti22220a
10.Place siphon tube set in grounded metal pail par- tially filled with flushing fluid. See Grounding, page 11. Do steps 1- 6 of Startup, page 14, to flush out storage oil shipped in sprayer. Use water to flush
ti5856a
Flush
332758A | 13 |
