9. Raise siphon tube above flushing fluid.
Cleanup
13.Remove filter from gun if installed. Clean and inspect. Install filter. See separate gun manual.
ti5848a
Flushing
Fluid
10.Close prime valve. Trigger gun into flushing pail to purge fluid from hose.
Flush
ti22221a
11.Turn pressure control knob all the way down and power switch OFF. Unplug sprayer.
ON
OFF
ti22222a
12.If you have a filter installed on your sprayer, remove filter. Clean and inspect. Install filter.
ti22225a
ti22224a
14.If flushing with water, flush again with mineral spirits or Pump Armor to leave a protective coating to pre- vent freezing or corrosion.
Pump Armor
ti2895a
15.Wipe sprayer, hose and gun with a rag soaked in water or mineral spirits.
ti2776a
332758A | 17 |
