Spray Tip Selection Chart
AAF Fine Finish Pre-Orifice Spray Tips
Recommended for high finish quality applications at low and medium pressures. AAF tips have a
Order desired tip, Part No. AAFxxx, where xxx =
| * Fluid Output |
| Maximum Pattern Width at 12 in. (305 mm) |
| |||||
| fl oz/min (lpm) |
|
|
| in. (mm) |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| 4 to 6 | 6 to 8 | 8 to 10 |
| 10 to 12 | 12 to 14 | 14 to 16 |
Orifice Size | at 600 psi | at 1000 psi | (150) | (200) | (250) |
| (300) | (350) | (400) |
|
|
|
|
|
|
| |||
in. (mm) | (4.1 MPa, 41 bar) | (7.0 MPa, 70 bar) |
|
| Spray Tip |
|
| ||
|
|
|
|
|
|
|
|
|
|
0.009 (0.229) | 7.0 (0.21) | 8.5 (0.25) | 208 | 308 | 408 |
|
|
|
|
0.011 (0.279) | 9.5 (0.28) | 12.5 (0.37) | 210 | 310 | 410 |
| 510 | 610 | 710 |
|
|
|
|
|
|
|
|
|
|
0.013 (0.330) | 12.0 (0.35) | 16.0 (0.47) | 212 | 312 | 412 |
| 512 | 612 | 712 |
0.015 (0.381) | 16.0 (0.47) | 21.0 (0.62) |
|
| 414 |
| 514 | 614 | 714 |
0.017 (0.432) | 20.0 (0.59) | 26.5 (0.78) |
|
| 416 |
| 516 | 616 | 716 |
|
|
|
|
|
|
|
|
|
|
*Tips are tested in water.
Fluid output (Q) at other pressures (P) can be calculated by this formula: Q = (0.041) (QT) 
P where QT = fluid output (fl oz/min) at 600 psi from the above table for the selected orifice size.
RAC SwitchTips, for use with G40 RAC Air Cap
NOTE: All tips in the Spray Tip Selection Charts below can be used with Model G40 guns equipped with RAC air cap 24C921.
NOTE: Tips are sometimes packaged with other promo- tional parts intended for the airless market. Disregard extra parts.
LTX RAC Spray Tips
Order desired tip, Part No. LTXxxx, where xxx =
|
|
|
| ❖ Maximum Pattern Width at 12 in. (305 mm) |
| |||||
| * Fluid Output, |
|
|
|
| in. (mm) |
|
|
| |
|
|
|
|
|
|
|
|
|
| |
| 2 to 4 | 4 to 6 | 6 to 8 | 8 to 10 | 10 to 12 | 12 to 14 | 14 to 16 | 16 to 18 | 18 to 20 | |
| at 2000 psi | |||||||||
| (100) | (150) | (200) | (250) | (300) | (350) | (400) | (450) | (500) | |
Orifice Size in. | (14.0 MPa, 140 bar) | |||||||||
(mm) | fl oz/min (lpm) |
|
|
|
| Spray Tip |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
0.009 (0.229) | 11.2 (0.33) | 109 | 209 | 309 | 409 | 509 |
|
|
|
|
0.011 (0.279) | 16.6 (0.49) | 111 | 211 | 311 | 411 | 511 | 611 |
|
|
|
0.013 (0.330) | 23.3 (0.69) |
| 213 | 313 | 413 | 513 | 613 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.015 (0.381) | 30.8 (0.91) | 115 | 215 | 315 | 415 | 515 | 615 |
|
|
|
0.017 (0.432) | 39.5 (1.17) |
| 217 | 317 | 417 | 517 | 617 |
| 817 |
|
0.019 (0.483) | 49.7 (1.47) |
| 219 | 319 | 419 | 519 | 619 |
| 819 |
|
|
|
|
|
|
|
|
|
|
|
|
0.021 (0.533) | 60.5 (1.79) |
| 221 | 321 | 421 | 521 | 621 | 721 | 821 |
|
0.023 (0.584) | 72.7 (2.15) |
|
| 323 | 423 | 523 | 623 | 723 |
|
|
0.025 (0.635) | 85.9 (2.54) |
| 225 | 325 | 425 | 525 | 625 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.027 (0.686) | 100.0 (2.96) |
| 227 | 327 | 427 | 527 | 627 |
| 827 |
|
0.029 (0.737) | 115.6 (3.42) |
|
| 329 | 429 | 529 | 629 | 729 |
|
|
0.031 (0.787) | 131.8 (3.90) |
| 231 | 331 | 431 | 531 | 631 |
| 831 |
|
|
|
|
|
|
|
|
|
|
|
|
0.033 (0.838) | 149.4 (4.42) |
|
|
| 433 | 533 | 633 |
| 833 |
|
0.035 (0.889) | 168.4 (4.98) |
| 235 | 335 | 435 | 535 | 635 | 735 | 835 |
|
*Tips are tested in water.
Fluid output (Q) at other pressures (P) can be calculated by this formula: Q = (0.041) (QT) 
P where QT = fluid output (fl oz/min) from the above table for the selected orifice size.
❖Measured with NO airflow. Air assist will tend to reduce pattern lengths by 1 in. to 2 in.
3A0149E | 33 |
