Operation
Connect the main air line to the quick disconnect fitting (28) on the agitator speed controller. Do not exceed the maximum air inlet pressure of 100 psi (0.7 MPa, 7.0 bar).
Set the agitator speed using the knob (16) on the top of the speed controller. Turn the knob counterclockwise (outward) to increase agitator speed. Turn the knob clockwise (inward) to decrease agitator speed. Once the desired agitator speed is set, the speed controller will maintain that speed by regulating the airflow to the air motor.
Turn knob counterclockwise to increase speed.
28
16
Turn knob clockwise to decrease speed.
To shut off the agitator, disconnect the air supply or turn the speed adjustment knob clockwise until it is fully closed.
3A1315A | 5 |
