Troubleshooting
Problem | Solution |
|
|
The speed controller does not adjust for a change in | Remove the needle (13). and liberally lubricate the |
load, or shuts off before the knob (16) is turned all | needle and |
the way down. | based grease. |
|
|
The speed controller does not maintain a consistent | Replace the needle (13), |
speed, or the speed rapidly fluctuates. | using Repair Kit 24J886. |
|
|
Upon startup, the motor runs away for a few seconds | Ensure that the compression nut (24) and flange |
before the speed controller slows it down. | connector (23) are securely tightened to the motor |
| shaft. See Installation, page 3 . |
|
|
6 | 3A1315A |