Graco 3A1315A, 24G621 important safety instructions Kit Parts, Description

Kit Parts

The kit contains all necessary parts and tools to install the agitator speed controller.

Ref.	Description	Qty
No.
1	HOUSING, lower, speed controller	1
2	HOUSING, upper, speed controller	1
3*	BALL BEARING	1
4	SHAFT, drive	1
5	BAR, mounting	2
6	SCREW, machine, pan-head; 8–32	1
	x 3/4 in. (19 mm)
7	NUT, hex; 8–32	1
8	ARM, cam	2
9	BEARING, sleeve; bronze	2
10	PIN	2
11*	PACKING, u-cup; UHMWPE	1
12	WASHER, speed controller	1
13*	NEEDLE, speed controller	1
14	SEAT, needle	1
15	NUT, adjustment	1
16	KNOB, adjusting	1
18*	O-RING; chemically resistant	1
	fluoroelastomer; 0.816 in. (20.7
	mm) OD
19*	O-RING; chemically resistant	1
	fluoroelastomer; 1.5 in. (38 mm) OD
20*	BALL BEARING	1
21	CONNECTOR; 1/4 npt(m) x 1/4 in.	1
	(6 mm) OD tube
22	O-RING; chemically resistant	1
	fluoroelastomer; 0.441 in. (11.2
	mm) OD
23	CONNECTOR, flange; 3/16 hex	1
	socket
24	NUT, compression	1
25	WRENCH, allen; 3/16 hex	1
26	WRENCH, multi-function	1

Ref.	Description	Qty
No.
27	TUBE, nylon; 1/4 in. (6 mm) OD; 2	1
	ft (0.6 m)
28	FITTING, quick-disconnect, air; 1/8	1
	npt(m)
29	CONNECTOR; 1/8 npt(m) x 1/4 in.	1
	(6 mm) OD tube
33*	O-RING; buna-N; 0.375 in. (9.5	1
	mm) OD

* These parts are included in Repair Kit 24J886.

TI17004a-1

TI17253a-1

8 3A1315A