B. Convert toys for toddler use
Step 1. | Mirror faces |
outside of unit | |
House: Replace on tray with |
|
mirror facing outside of unit. Turn |
|
base counterclockwise to fasten |
|
it to tray. |
|
Step 2. |
|
Shape toys: Untie string under |
|
tray and remove them. (Shapes |
|
fit into different openings in |
|
house.) Replace string, attached |
|
only to phone, and retie again |
|
under tray. |
|
Step 3.
Ring loop: Remove by pulling ends slightly apart under tray and pushing loop up. Remove rings. Turn loop upside down. From underside of tray, insert ends of loop back into holes and push up until peg ends snap in place. Put rings onto pegs.
Step 4.
Cup: Reach underneath tray, wrap fingers around cup, and squeeze toward you with both hands to release pivot pin of cup from hole in tray. Turn cup around so handle is away from house as shown, and reattach to tray. Cup now can pivot to drop ball onto ball track beneath.
Pull pin out 
Step 5.
Ball holder: Squeeze latches under tray to release ball holder.
Pull ball holder out of tray. Open ball holder to remove ball. Put ball into cup. Turn ball holder upside down and reinsert into tray as a cup holder. Push it all the way down onto tray.
Step 6.
Wand: Pull up on handle of butterfly wand to detach it from tray for toddler to play with. Do not pull butterfly off handle.
Step 7.
Seat: Store in a safe place, not exposed to sun or heat, in case you wish to convert back to an infant setup in the future.
Your Entertainer® should now look like the
11 | 12 |
|
|
