Graco 6123.6113 &6114, 6310 3.3 Removing and Attaching Base, 3.4 Adjusting Handle, BOTH, NEVER, Pull up, A: MUST, firmly into base

3.3 Removing and Attaching Base

To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown .
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
3.4 Adjusting Handle	

1.Press handle adjustment buttons on both sides of handle .

2.Rotate handle until it clicks into any of the 5 positions:

Position A: MUST be used

when carrying by handle,

Position B,C,D: are convenience positions,

Position E: is the sitting position,

NEVER use positions B or C in the vehicle.

BOTH handle adjustment

buttons must pop out to lock handle in place .

3.Push and pull on the handle to be sure it is locked firmly in position.

Carrying	B	
A
		C
		D

E Sitting

13