Graco ISPA005AA Removing and Attaching Base, Adjusting Handle, as shown
, both sides of handle 

3.3 Removing and Attaching Base

To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown .

To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.

3.4 Adjusting Handle
1. Press handle adjustment buttons on
	
both sides of handle .

2. Rotate handle until it clicks into any of three positions (for carrying, reclining, or sitting). BOTH handle adjustment buttons must pop out to lock handle in place .

3. Push and pull on the handle to be	Carrying
	
sure it is locked firmly in position.
	Reclining
	Sitting

13