6.3Installing the Infant Restraint/Base Using Vehicle Belt

6.3Installing the Infant Restraint/Base Using Vehicle Belt

You must carefully follow the instructions provided by your vehicle manufacturer, in addition to the information in this manual. Be sure you have read and understood section 5, “Infant Restraint Location” on p.21-26.

Make sure vehicle is on level ground so that



 

the level indicator, which is attached to the

 

infant restraint, can be used to properly

 

recline the infant restraint .

 

If a front passenger seat is used, slide the vehicle seat rearward as far as possible from the dashboard. If a rear seat is used, make sure the seat in front of it is moved forward enough and is upright enough to allow room for the infant restraint.

1.Remove infant restraint from base, regardless of whether or not you plan on using the base.

2.Place the base  or infant restraint without base  in a rear-facing position in a forward-facing vehicle seat.

Make sure vehicle is on level ground so thatthe level indicator, which is attached to the infant restraint, can be used to properlyrecline the infant restraint . 

34

Page 65 Page 67
Page 66
Image 66
Graco ISPA005AA Installing the Infant Restraint/Base Using Vehicle Belt, Make sure vehicle is on level ground so that
Page 65 Page 67
Top Page Image Contents