![](/images/new-backgrounds/1286035/286035159x1.webp)
6.2.1 3-Point Harness
5.Buckle harness to the latch between child’s legs. Make sure that you hear a “click.”
DO NOT use the infant restraint if the harness does not latch in place. Call Graco at
6.From the back, pull strap through harness tightener to tighten the straps as shown . CHECK that both straps are flat and tight on child’s shoulders.
7.Snap harness clip pieces together . Position harness clip in middle of chest, level with armpits and away from the neck .
8.SAFETY CHECK:
a)CHECK that harness straps are not twisted.
b)CHECK that the harness is snug. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position .
32