Using the Timer (6 speed models)
•Utiliser la minuterie (modèles à 6 vitesses)
•Uso del reloj (modelos de 6 velocidades)
58
You can program your swing to turn off after a certain period of time. The timer button, located between the two speed buttons, sets the swing time in
To add time, push the timer button once more for every ten minutes you wish to add. The active speed setting light will blink in repetition, one blink for every ten minutes programmed. The number of blinks will decrease to give you an indication of the time remaining.
The light will blink continuously when a minute or less of time is remaining. If you do not set the timer at all, your swing will run until you turn it off. To cancel timer mode, press and hold the timer button until the light stops blinking.
If you are using the timer, both the swing and the music will stop when the time runs out.
For example, if the center light is red and it’s blinking two times quickly between pauses, your swing is on speed 5 and will run for twenty minutes before stopping.
To add time, push the time button once or twice.
To turn swing off, press and hold either speed button briefly.
34
