Graco PD106974A manual Latch Belt Routing, 2EMOVING PAD will Expose the Rotating Latch belt. fig. b

OPERATIONS and ADJUSTMENTS (continued)

6LATCH Belt Routing:

LATCH belt MUST be routed through

the proper openings depending on direction of child restraint use.

A 2EMOVE PAD FROMPFRONT OF SEATMAREA BY pulling out 2-button clips on lower front edge of child restraint (fig. a) and 2-button clip in center of seat.

2EMOVING PAD WILL EXPOSE THE ROTATING LATCH belt. (fig. b)

BRotate LATCH belt so that the belt routes through the proper openings (Pg 29, fig. d and fig. e  "ELTS MUSTTREMAIN mAT and tight against the child restraint BEFORE reattaching the seat pad 2-button clips. LATCH belt must

not interfere with the harness. (fig. c)

CRe-attach pad to child restraint by

SNAPPING THE BUTTONHCLIPSBACK IN place. DO NOT allow 2-button clip to interfere with the LATCH BELTEOR VEHICLE seat belt.

(fig. a) (fig. b)

Rotating LATCH Belt

(under seat pad)

Belt must be flat and tight

28 (fig. c)