Graco 1753039, PD108602A owner manual Safe Vehicle Belt Systems, When buckled, the belt is

6.2.2SAFE Vehicle Belt Systems

THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR INFANT RESTRAINT, IF the seat location meets all other requirements of these instructions and those in your vehicle owner's manual. LATCH can be used in place of the vehicle belt system. Please refer to vehicle ownerÊs manual for LATCH locations.

When using infant restraint without the base, adjust the belt as described in this section for these types of vehicle seat belts.

When using the base to install the infant restraint, you must ALWAYS use the Lock-off to secure the lap belt or lap/shoulder belt. See „7.2 Installing the Infant Restraint and Base Using Vehicle Belt‰ , page. 34 for installation instructions when using the base.

Some vehicle lap/shoulder seat belts have a plastic button on the belt. Do not allow the button to interfere with the belt routing through the vehicle belt path when installing the seat alone, or with the lock-off when installing the seat and the base.

• Lap Belts - Manually Adjusted	When buckled, the belt is
	tightened manually by pulling on
	the excess belt while pushing
	down hard on the infant restraint.

29