To select your preferred mode:
2.Turn off the thermometer. Press the Mode button and release. Cycle through the 4 modes by pressing the Mode button until you find your preferred mode.
Each mode will point to a different body part and the stand by icon will display the full body as shown below. After 8 seconds the thermometer will enter the “ready for measuring mode automatically, or you can turn off the thermometer and turn it back on again and you will hear a beep, the thermometer will flash all of the display icons.
NOTE: After the first use, the prior reading and a figure indicating the last measurement method will automatically appear for 2 seconds. Each time you turn the thermometer on, it will automatically default to the same method as the prior reading.
