Showing a mode display

When the panel is open:

Touch the menu screen switching touchkey when the main screen is being displayed to show the menu screen.

Touch the Title List Select key (--- SELECT) on the menu screen to show the Title List display.

In the Title List display, the titles of items stored in the [DIRECT] buttons 1 to 6 are listed.

In the DAB mode, a service label is displayed.

Opening and turning the display

WARNING

To prevent the battery from going dead, operate this unit with the engine running, if possible.

When the liquid crystal panel is operat- ing, be careful not to get your hand or fin- ger caught between the panel and main unit or the instrument panel of the car.

Standing up the liquid crystal panel

Press the [OPEN] button and the liquid crystal panel comes out and stand up automatically.

While the liquid crystal panel is opening or clos- ing, the LED blinks.

NOTE:

If the liquid crystal panel stops in the middle of its operation, press the [OPEN] button to house the panel and press the button again to stand it up. The unit enters the same display mode as the display was turned off the last time.

 

 

Basic Operations

English

liquid crystal panel

Adjusting the angel, etc. of the

 

The angle of the liquid crystal panel or protruding

 

of the unit or light coming into the car.

Owner’s

amount of the panel from the mounting surface

 

can be adjusted depending on the mounting angle

manual

To adjust the angle

 

 

 

 

 

 

 

Every time the [TILT] button is pressed, the liquid

 

crystal panel tilts forward or backward at up to

 

 

about 20 degrees. The adjusted angel is stored in

 

memory.

 

 

 

 

20˚

20˚

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

• Do not move the liquid crystal panel by hand.

To adjust the slide position

Press and hold the [TILT] button and release when a beep is heard.

The liquid crystal panel slides forward or back- ward. The adjusted slide position is stored in memory.

Housing the liquid crystal panel

Press the [OPEN] button and the liquid crystal panel is housed automatically.

NOTE:

When leaving this unit unused for a long period of time or leaving your car, be sure to house the liquid

crystal panel into the main unit.

VRX815 17

Page 13
Image 13
Clarion VRX815 owner manual Showing a mode display, Opening and turning the display, Standing up the liquid crystal panel