Other Functions

Always turning on the button illumination on the operation panel

Note:

The following operation is enabled when the panel is open.

Doing this operation turns on and off the illunination only for the buttons of VoL [+] and [–,] [TILT], and [OPEN].

The button illumination on the operation panel when the display is turned upward, can be switched between “ON” and “OFF”.

“OFF”: Button illumination on the operation panel turns on for 5 seconds;

“ON”: Button illumination is always on when the power is turned on;

1.When the panel is open, press the [ADJ] but- ton to show the adjustment selection display.

2.Touch the [UPPER ILLUMI] key to select “ON” or “OFF”.

3.Touch the [ON] or [OFF] key for setting.

4.Press the [ADJ] button to return to the previ- ous mode.

To set “ON” again, switch “OFF” to “ON” manu- ally.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for Radio stations, TV sta- tions and CDs. The numbers of titles that can be entered for each mode are as follows.

Mode

Number of titles

TUNER mode

30 titles

TV mode

15 titles

CD mode

50 titles

CD changer mode

Number of titles

CDC655z connected

60 titles

CDC655Tz connected

100 titles

CDC1255z connected

50 titles

You cannot enter titles with the unit in Seek, Preset Scan, Auto store (TUNER, TV or DAB) mode. Can- cel each of those operations before entering titles.

1.Press the [FUNC] button to select the mode you want to enter a title (TUNER, CD, CD changer or TV).

2.Select and play a CD or a CD in the CD changer or tune in to a Radio station or a TV station for which you want to enter the title.

3.Touch the [TITLE INPUT] key in the MENU display.

Touch the [INPUT] key in the USER TITLE dis- play, the display switches to the title input mode display.

4.Touch the characters, symbols, etc. shown in the display to input titles.

, ” : Centering

BS” : Backspace

” : Space

MEMO” : Memory

z(w)” : Scroll

NOTE:

Up to 10 characters can be input.

To switch the character types, touch the scroll key (z) at the lower left of the display.

5.Repeat the step 4 to enter the complete title.

6.Touch the [MEMO] key for 2 seconds or longer to store the title into memory and cancel title input mode.

Title list play

You can display a list of titles, then select the disc or broadcast station to listen to from that list.

You can not display a title list with the unit in Seek, Preset Scan, Auto store (Tuner, TV or DAB) mode. Cancel those operation modes before to display a title list.

1.With the unit in radio, CD/MD changer, TV or DAB mode, touch the [P. CH SELECT], [DISC SELECT] key. A title list is displayed. The fol- lowing functions can be carried out in a title list display.

TUNER: A title of a station stored in the pre- sets 1 to 6 or frequency is displayed;

CD/MD changer: DISC titles for discs 1 to 6 are displayed (By changing over a display page in case of 12-CD changer, disc 7 to 12 can be displayed). When there is not any disc in a changer, ”NO DISC” is displayed.

TV: A title of a channel stored in the presets 1 to 6 or a channel number is displayed.

2.Touch the [DIRECT] key (1 to 6) to select one of the items 1 to 6 and reproduce the selected broadcast station or disc.

In case of 12-CD changer, touch the [DISC SE- LECT] key to change over to a list display of discs 7 to 12.

3.Touch the [RTN] key again to return to the STANDARD display.

English Owner’s manual

VRX815 35

Page 31
Image 31
Clarion VRX815 Other Functions, Entering titles, Title list play, Mode Number of titles, CD changer mode Number of titles