Remote Control, Inserting the Batteries | Clarion VRX815 specs

English Owner’s manual

7. REMOTE CONTROL
When the panel is open
Remote control unit	Receiver for remote control unit
Remote control unit
Operating range: 30˚ in all directions
Signal transmitter

	1	@
	3	5
	3	4
		4
		2
	7
	6	8

9!

0

Inserting the Batteries

1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow.

2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.

Notes:

Using batteries improperly can cause them to explode. Take note of the following points:

• When replacing batteries, replace both batteries with new ones.

Rear side

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

AA (SUM-3, IECR-6/1.5V) Batteries

Rear cover

12 VRX815

Image 8

Clarion VRX815 owner manual Remote Control, Inserting the Batteries

Contents

VRX815 Features Display Nomenclature Color LCD Display ∗1 An example screen indication in the radio mode VTR N/P Ntsc Enhancer Type Remote Control Inserting the Batteries Functions of Remote Control Unit Buttons Mode Radio DAB CD changer Button MD changer Removing the DCP Attaching the DCP LCD panel/Generalities CleaningCleaning the cabinet Turning on and off the power Adjusting the volumeSwitching the display Selecting a mode Showing a mode display Adjusting the angel, etc.Housing the liquid crystal panel Opening and turning the display Setting the Z-enhancer Adjusting the Z-enhancerTurning on and off the monitor Mute Adjusting the bass and treble Adjusting the balance and faderChanging the setting of the display background Turning on/off the loudness Radio Operations Preset scan Radio Operations Manual memory Instant station recall ISRAuto store ISR memory CD Operations CD Operations Scan play Displaying CD titles Repeat playRandom play Scrolling a CD-text title Switching the band Switching the VTR system between Ntsc and PALAdjusting the brightness and tone of color Visual Operations CD/MD Changer Operations Scrolling titles MD Selecting an MDSelecting a disc from 1 to Touch the Direct key 1 to 6 and select the desired MD When playing a disc 1 to Top function CDTop function MD Disc repeat play TV Operations TV Operations Seek tuning Setting the TV diver TV OperationsAbout DAB programmes Listening to the DAB Switching programmes Digital Radio/DAB OperationsProgramme scan AF function Information standby mode Digital Radio/DAB Operations TA Traffic AnnouncementInformation select Selecting PTY Operating the PTY Select display when the panel is open PTY preset memoryCancelling an emergency broadcast Digital Radio/DAB Operations PTY seek Dynamic Label Function DLS display modeDLS Calling Mode Number of titles CD changer mode Number of titlesOther Functions Entering titles Setting the button illumination Clock AdjustmentSetting the beep Factory default Selecting the Standard mode or the professional mode DSP operationsDSP control function DSP functions DSP operations Woofer level adjustment Detail adjustment of listening positionEQ effect ON/OFF Selection of listening position Setting and storing G.EQ DSP operationsCalling G.EQ Basic Pattern/USER Pattern DSP operations Calling DSF Basic Pattern/USER Pattern VSE effect ON/OFFCalling VSE Basic Pattern/USER Pattern Press the A-Mbutton to change into the Standard display Setting and storing VSE Properties/ Memory into User Pattern Calling P.EQ Basic Pattern/USER Pattern Operation Center level adjustmentDVD Operations Case of Difficulty DVD Operations Check it again Error Displays FM Tuner AM TunerCD player General VRX815 General Cautions Installing the Main Unit Screw Removing the Main Unit Spring into hole a of the hook plate, then pull Wire Connection Description TV Tunner Connecting the parking brake lead TTX7501z TTX7503z/TTX7504z MDC655z MDC655z CDC655z/655Tz 1255z/DCZ625 CeNET TV Tuner CCA-389 Memo