VISUAL Operations
English Owner’s manual
This function is available when a VTR, etc. is con- nected to the visual/input or visual 2 terminal.
∗The visual 1 mode is not available when a TV tuner is connected to the visual/input.
Switching the band
Press the [BAND] button or touch the [BAND] key.
Switching the VTR system between NTSC and PAL
∗This function is enabled only when the panel is open. Switch to the VTR/DVD video mode you use.
●“COLOR”:
4.When adjustment is made, touch the [RTN] key to return to the ADJ MENU display.
Touch the [RTN] key again to return to the STANDARD display.
∗To return from the adjust a level display to the STANDARD display, press the [ADJ] button once again.
Changing over monitor display size
∗This function is available only when the panel is open.
1. Press the [ADJ] button to switch to the adjust- | Note | |
ment selection display. | ||
• This function is not available while you are driving. | ||
|
2.Touch the [z] key to select “VTR N/P”.
Touch the [VTR N/P] key, [NTSC] key and [PAL] key appears in the display.
3.Touch the [NTSC] key or [PAL] key to select “NTSC” or “PAL”.
Adjusting the brightness and tone of color
Notes:
•This operation is available only when the car is stopped and the parking brake is applied.
•This function is not available when the display is stored.
•The HUE setting can be adjusted only when the NTSC mode is selected.
•Switch to the VTR/TV/DVD video mode you see.
1.Press the [ADJ] button to switch to the adjust- ment selection display.
2.Touch the [MONI ADJ] key to display [BRIGHT], [HUE] and [COLOR] key.Touch the [BRIGHT], [HUE] and [COLOR] key to adjust BRIGHT, HUE and COLOR.
● “BRIGHT”:
Adjust the brightness of the display.
●“HUE”:
Adjust the tone of color (red is emphasized or green is emphasized)
●“COLOR”:
Adjust the color saturation.
3.Operate the touch key to adjust a level.
● “BRIGHT”:
●“HUE”:
[R] key or [G] key
•Switch to the VTR/TV/DVD video mode you see.
1.Press the [DISP] button to change over the monitor display size. Each time you press the [DISP] button, the monitor display size changes in the following order:
“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜ “CIN- EMA” ➜ “NORMAL”
●“NORMAL”: (normal display)
There is a black area at both right and left ends of a display. In case of normal TV broadcast- ing (4:3), the image can be shown without be- ing cut or deformed.
●“WIDE”: (wide mode)
The image at right and left ends in a display elongates horizontally.
●“F. WIDE”: (full wide mode)
The whole image elongates horizontally.
●“CINEMA”: (cinema mode)
The image at both top and bottom in a display disappears.
Notes:
•When a normal 4:3 size image, not being a wide one, is viewed by displaying it fully on a wide moni- tor display in a wide mode or a
•During superimposed display, it becomes a
24 VRX815
