English Installation and Wire connection manual
3. GENERAL CAUTIONS
1. Do not open the case. There are no user ser- | 2. Use a soft, dry cloth to clean the case. Never |
viceable parts inside. If you drop anything into | use a rough cloth, thinner, benzine, or alcohol, |
the unit during installation, consult your dealer | etc. For tough dirt, apply a little cold or warm |
or an authorized CLARION service centre. | water to a soft cloth and wipe off the dirt gen- |
| tly. |
4. CAUTIONS ON INSTALLATION
1.Prepare all articles necessary for installing the main unit before starting.
2.This model is used with the LCD panel slid for- wards (shell loading system). On some types of cars, the LCD panel may touch the dash- board or shift lever, in which case it cannot be installed. Check that the set will not hamper operation of the shift lever before choosing the place of installation.(Figure 2)
Dashboard
5.Use the enclosed screws for installation. Us- ing other screws can cause damage. (Figure 4)
ChassisChassis
Damage
Max. 8 mm
Shift lever | Shift lever |
| |
(check that it does not |
|
touch the LCD.) |
|
Figure 2
3.Install the unit within 30° of the horizontal plane. (Figure 3)
Figure 4
6.The source unit has mounting screw holes for NISSAN (N marks) and TOYOTA (T marks) vehicles.
T N T
NT N
Figure 5
Max. 30˚
Figure 3
4.If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand.
48 VRX815
