DSP operations
∗Touch the [EDIT] key to show VSE adjusting dis- play, in which the properties of currently selected pattern can be adjusted.
∗By pressing the [BAND] button in BASIC pat- tern selecting display or USER pattern selec- tion/memory display you can switch between the two patterns, BASIC and USER.
4.After the selecting, press the
Setting and storing VSE Properties/ Memory into USER Pattern
1.Repeat the steps 1 and 2 of the previous pro- cedure (Calling VSE BASIC Pattern/USER pattern) to show BASIC pattern selecting dis- play or USER pattern selection/memory dis- play.
2.Touch the [EDIT] key to show the VSE adjust- ing display.
Professional mode/P.EQ opera- tions
P.EQ effect ON/OFF
∗The factory default setting is “ON”.
1.Press the
2.Touch the [P.EQ ON/OFF] key to select “on” and “off”.
3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
4.After the setting, press the
Note:
•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.
English Owner’s manual
3.Select an item to be adjusted by touching [ITEM] key in the VSE adjusting display.
The VSE adjustment contents are as follows:
●“CAR LENGTH”
Compensates for the length of the car‘s inte- rior (longitudinal direction).
●“CAR WIDTH”
Compensates for the width of the car’s interior (lateral direction).
●“DIFFUSE”
Compensates for special impression.
4.Touch the [w] or [z] key to make the adjust- ment.
The adjustment range is to 1 to 10 for each time.
5.After making adjustments to a desired pattern by repeating the steps 3 and 4, touch the [RTN] key to change over to the BASIC/USER pat- tern selection/memory display.
6.Press and hold one of [DIRECT] button for 2 seconds or longer to store the adjusted VSE pattern to the USER memory.
7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE IN- PUT] key.
∗For title inputting method, refer to the section “Entering titles”.
Calling P.EQ BASIC Pattern/USER Pattern
1.Press the
2.Touch the [z] key to select “P.EQ BASIC” and “P.EQ USER” mode.
Touch the [P.EQ BASIC] and [P.EQ USER] key to show BASIC pattern selecting display or USER pattern selection/memory display.
3.In the pattern selecting display, touch the one of pattern key to call corresponding P.EQ pat- tern. In this display, pressing the No. button in corresponding to the [DIRECT] key can also call the P.EQ pattern.
∗After selecting the P.EQ Pattern, touch the [MEMO] key to copy the select pattern to the USER pattern.
∗Touch the [EDIT] key to show P.EQ adjusting display, in which the properties of currently se- lected pattern can be adjusted.
∗By pressing the [BAND] button in BASIC pat- tern selecting display or USER pattern selec- tion/memory display you can switch between the two patterns, BASIC and USER.
4.After the selecting, press the
8.Press the [A-M] button to change into the STANDARD display.
VRX815 41
