axis international marketing 2130R PTZ manual Network Settings, Emergency Actions

16 Configuration AXIS 2130/2130R User’s Manual

Emergency Actions

In certain circumstances, it may be necessary to reinstate the Factory Default settings for your AXIS 2130. This is performed in one of two ways:

•By clicking the Factory Default button on the General Settings admin page. This will reset most of the unit’s parameters but will save the IP address, the Subnet mask, the Default Router and the Mac (Ethernet) address.

•By pressing the Reset Button, located on the underside of the unit. This option will reset ALL the parameters currently configured in the unit. To reset the unit using the reset button, please see Reinstating the Factory Default Settings, on page 20.

Network Settings

Click the Network Settings button to display, edit and refine the settings for:

•TCP/IP - used by the camera for transmitting data over the network.

•DNS (Domain Name System) - the network service used by the product for translating domain names into IP addresses.

•SMTP (E-mail)- this is the protocol for sending e-mail messages between mail servers on the network.

•Miscellaneous - set the network media and to restrict the bandwidth used by the product. Configure the Network Settings with reference to the on-line help and the table below:

TCP/IP Parameters	Description
DHCP	Enable DHCP to allow centralized assignation of IP addresses. Requires a DHCP server on the network.
BOOTP	Enable the BOOTP protocol for setting the IP address automatically. For further information on using
	BOOTP, see Other IP Setup Methods, on page 23. If you intend to use the AXIS IP Installer, BOOTP must be
	enabled.
IP address	Specifies the unique 32-bit IP address of your unit.
Default Router	Specifies the network router your video server will use.
Subnet Mask	If unsure what value to use, contact your system administrator.
Host Name	If you are using a DNS server on your network (see below), this is usually the same as the assigned DNS
	Name.

DNS Parameters	Description
Domain Name	Enter the name of the domain your AXIS 2130 belongs to.
Primary DNS	Defines the IP address of the primary DNS server. This is used for identifying a computer by name instead
	of IP address.
Secondary DNS	The IP address of the secondary DNS server. This will be used if the primary DNS server is unavailable.

SMTP Parameters	Description
Primary Mail Server	Defines the server that provides your mail facilities.
Secondary Mail Server	Defines a secondary server that can provide mail facilities in the event of the primary server being
	unavailable.
Return Email Address	The reply address for e-mails sent by the AXIS 2130; that is, the name that will appear in the ‘From’ field
	of the dispatched email.