8 | Product Description | AXIS 2130/2130R User’s Manual |
Tripod Mounting
The AXIS 2130 is supplied with a screw hole for tripod mounting. The screw hole is located on the base of the unit, as shown below. The base plate of the AXIS 2130R is similar, but is supplied with a ceiling mounting plate instead of the tripod screw hole.
Reset Button 
Press to restore the factory default
settings.
Tripod Screw Hole
The serial number is used for setting the product’s IP address.
Serial Number
The serial number is used for setting the product’s IP address.
Ceiling Mounting the AXIS 2130R
The AXIS 2130R is designed exclusively for ceiling mounting and a special mounting plate is supplied for the purpose. Screw the plate (screws not supplied) to the ceiling at the point of installation.
Screw holes for ceiling 
mounting
WARNING!
When installing the AXIS 2130R on the ceiling, check that the ceiling is strong enough to bear the weight of the cam- era plus the mounting plate. A weak fitting could result in the camera fall- ing and causing serious injury.
Check for looseness in the camera installation mount at least once a year.
Mounting Plate Information
Distance between screw holes - 120mm (418/25 in.)
Screw hole diameter: 6mm (1/4 in.)
Plate thickness: 1.6 mm (1/16 in.)
