20 | Configuration | AXIS 2130/2130R User’s Manual |
Reinstating the Factory Default Settings
In certain circumstances, it may be necessary to reinstate the Factory Default settings for your AXIS 2130/2130R. This is performed by clicking the appropriate button within the Administration Tools, or by using the Reset Button.
Follow the instructions below to reinstate the product factory default settings using the Reset Button on the underside of the unit:
1.Using a pointed object (e.g. a paper clip) press the Reset Button and keep it pressed while you disconnect and reconnect the power.
2.Keep the button pressed for at least five seconds and then release it.
Note: Reinstating the factory default settings with the aid of the Reset Button will cause all param- 
eters (including the IP address) to be reset. Refer to Installation, on page 9, or Other IP Setup
Methods, on page 23, for information on how to set the IP address. To reset to the factory default settings, but with certain parameters saved, reset instead with the help of the button provided in the General Settings.
