22 | Using the AXIS 2130 PTZ Network Camera AXIS 2130/2130R User’s Manual |
Positional Control of the Camera
The camera’s Pan/Tilt/Zoom (PTZ) device is controlled directly from the unit’s web interface, as shown in the illustration below:
Zoom
Allows smooth or stepped camera zoom between telescopic and wide viewing.
Select Preset Position 
To enable quick and accurate camera posi- tioning, up to 40 specific positions can be saved as presets, which are created by the Adminis- trator. Selecting a preset position from the
For direct control of the
Pan/Tilt/Zoom device.
Focus |
|
|
|
|
| Iris |
Allows smooth or stepped |
|
|
| Controls the amount of light that | ||
camera focus between near |
|
|
| enters the camera through the lens. | ||
and far focus. |
|
|
| Set to Auto for optimum performance. | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tilt
Allows smooth or stepped vertical pan- ning of the camera.
Home (H) Returns the camera to the ‘Home’ position.
Pan 
Allows smooth or stepped horizontal panning of the camera.
Notes: •Clicking anywhere on the toolbar’s gradient allows for a “smooth” PTZ adjustment; whereas 
clicking on the left or right arrows causes a stepped incremental change.
•Pan/Tilt/Zoom control can be disabled by the Administrator and may be unavailable in the user interface.
