Graco PD247308A owner manual REAR-FACING Installation with Latch, To ITS Maximum LENGTH

REAR-FACING INSTALLATION WITH LATCH

™Adjust child restraint to recline position (fig. a). Flip recline feet under child restraint for rear facing use.

-AKE SURE &ORWARD &ACING&LATCH belt is stored. (see fig. c, pg. 41)

šPlace rear-facingON VEHICLE SEATCEQUIPPED with LATCH anchors.

›&OROEASE OFAINSTALLATIONIEXTEND LATCH belt

TO ITS MAXIMUM LENGTH

œ(OOK CONNECTORSNTO VEHICLE LOWER ANCHORS

(fig. b). Belt must lay flat and not be twisted. Pull connectors to be sure they are securely attached to the anchor points. (fig. c).

#HECK#THAT THE LOWER ANCHORTBELT STAYS TIGHT and does not slip from the tightened position. If

IT DOESTNOTDSTAY TIGHTOTRYYANOTHEROSEATINGR POSITION ORICONTACTN#USTOMER 3ERVICE

Ÿ#HECK#LEVELCINDICATORVON CHILD RESTRAINT (fig. f).

Vehicle must BEBON LEVEL GROUNDVANDLCHILDRIN U CHILDCRESTRAINT WHEN CHECKINGILEVEL INDICATOR

Ball MUST be entirely in green zone (fig. f). If

NECESSARYPLACELROLLED TOWELSLUNDERDCHILDO RESTRAINT ATRVEHICLETSEAT CREASE UNTIL ENTIRE BALL A IS INIGREENIZONEG 4HENERECHECK LEVEL INDICATOR

DO NOT use tether rear-facing4ETHERHmustbe STORED SEE h4ETHERH3TORAGEv PAGER 

0RESSEDOWN lRMLY INNCENTER OFLCHILDIRESTRAINTN while pulling LATCH adjustment belt. (fig. d).

ž0ULL FRONT TORBACK AND LEFT TO RIGHT ATABELT PATH TO CHECK FOR SECUREFINSTALLATION (fig. e).

0ERIODICALLY CHECK THATYCHILDHRESTRAINTTIS SECURELYH INSTALLED AND PROPERLYALEVELED ADJUSTDIF NECESSARY

4OOREMOVE LATCHSEE h2EMOVING LATCH from 6EHICLE !NCHOR 0OINTSv PR 

18