Graco SDP5, SDM15, SDM5, SDP15 important safety instructions Preset Dispense FIG, See for terms D L

Dispensing Fluid and Operation Mode Screens

Preset Dispense (FIG. 22)

Preset Meters Only

D	MOBIL1 5W-20
	H	2.50	QTS	E
J	XXXXXXXXXXXXXXXX
G		4.0
ti122410a		L		F
FIG. 22

See FIG. 22 for terms D - L

D. Information Banner: Configurable information banner. Data is input in Setup Mode, Banner Screen, page 19.

E. Unit of Measurement: Identifies unit of measurement, pint, quart, gallon or liter. Unit is selected in Setup Mode, Units/Limit Screen, page 15.

F. Home Icon: Returns user to Home Screen.

G. Reset: Resets counter (H) to zero.

H. Counter: Before dispense has begun, display reads

0.00.As fluid is dispensed, counts up from zero. At the same time the Progression Bar (J) displays a real-time, visual representation of the progress made toward completing the dispense.

J.Progression Bar: Displays a real-time, visual representation of the progress made toward completing the dispense. Runs in conjunction with Counter (H).

For example, in FIG. 22, a partial dispense of 2.5 quarts of the total Preset Dispense of 5.0 quarts is shown. The Progression Bar shows that approximately half the dispense is complete.

L. Preset Quantities: Use the UP or DOWN ARROW to select field L on the task bar.

a.Use the UP or DOWN ARROWS to scroll through the 3 available Preset Quantities (L). Each time you press the UP or DOWN ARROWS, one of the 3 preset amounts dis- plays on the task bar in field L.

b.When the Preset Quantity you want to dispense is shown in field L, press the center, ENTER button to select it.

If a suitable preset quantity is not available, select an amount that is closest to the amount you want to dispense. Amounts can be modified following the

procedure described on page 23.

22 312865R