Graco SDM15, SDM5, SDP5, SDP15 important safety instructions 50 QTS, To dispense in Preset Mode

Dispensing Fluid and Operation Mode Screens

To dispense in Preset Mode:

If the display was asleep, press any button to wake up the display.

MOBIL1 5W-20

MANUAL

PRESET

TOTALS

ti12242a

FIG. 24

1.From HOME screen, use the UP or DOWN ARROWS to select PRESET (FIG. 24).

2.Press center, ENTER button to confirm selec- tion.The Preset Dispense screen (FIG. 25) appears.

3.Squeeze trigger to begin dispensing fluid. The trig- ger may be locked during the dispense.

Fluid flows. The amount displayed counts up from zero or from the previously dispensed amount (FIG. 25) and displays in field H. A visual representation of the dispense progression also appears on the progression bar (J).

When the preset amount has been dispensed, fluid flow stops automatically. The total dispensed amount appears in field H.

If you want to stop fluid flow before the preset amount is dispensed, release or unlock trigger. To continue dispensing fluid, squeeze and/or lock trigger again. Dispensed amount shown in field H and on progression bar (J) continues to count up toward preset amount.

If you want to continue dispensing fluid after preset amount has been dispensed, squeeze trigger. The meter continues dispensing fluid in Manual Mode until you release trigger.

	MOBIL1 5W-20
H		2.50 QTS
J	XXXXXXXXXXXXXXXX
	G	4.0
FIG. 25		ti12410a

4.Use LEFT or RIGHT ARROW to move curser to RESET button (G).

5.Press center ENTER button to reset the displayed amount in field H to zero and clear the progression bar (J).

24 312865R