Siemens 1054 operating instructions Resets to Deletes Unchanged Status at initialization

28.10.96

1054K07C.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit System Settings

Resetting the Base Station to the Status at Initialization

You can reset the base station to the initialization status, for example if you no longer have a clear overview of your settings. In order to keep this as simple as possible, however, not all settings are reset.

This procedure accomplishes the following:

a) Resets to	b) Deletes:	c) Unchanged:
status at initialization:
System settings	Units / Charges	System code
	Emergency numbers	Registration of mobile units
	Restricted numbers	Ring allocation
		Connection/operation type
		of the system

1.In idle status, push the ßkey and select “Service” from the main menu.

2.In the Service menu, select “System settings” and enter the system code (see also page 115).

Initialisation

After the corrected system code has been entered, the following menu appears: (Entire menu at left)

Scroll through the menu with NEXT ...

until “Initialisation” is on the 1st line; then select with OK.

The setting is displayed for 2 seconds.

System cd/Mn sys

Duration/Units Call barring

NEXT OK

Initialisation completed

117