Siemens 1054 operating instructions 012 N1 2

28.10.96

1054K06.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Standard Mobile Unit Lock

Set Class of Service for the Internal Stations

By setting the COS for every registered mobile unit and telephone, you can stipulate which sta- tions are allowed to place toll calls.

At initialization, all devices have full trunk authorization.

1.Full trunk authorization (= initialization status)

The device is capable of making outgoing and receiving incoming external calls.

2.Incoming authorization

The device is capable only of receiving incoming calls. All external dialing is blocked.

3.Internal authorization

The device can only make internal calls. All external dialing is blocked. Users can set up a consultation call with an authorized internal station, but cannot transfer an external call; the call is returned in this case.

w#!o

1____

!“

z*!

o

Press the keys shown in the sequence shown; enter the system code. Every digit entered replaces a dash on the screen.

Select external telephone line 1 or 2

.

Press the keys shown in the sequence shown

A list of the registered stations is shown.

Enter the internal number of the mobile unit or auxiliary device to be set, i.e. push one key between 0 and 9; here, the 2.

The current setting is shown.

A CD

1 __

A CD

012

A CD

n1 0123

A CD

n1 2 1

A CD

1	To activate full trunk authorization	Push the 1 (initializ. status)
or
0	For incoming authorization	Push the 0
or
“	For internal authorization	Push the 2 .

wPush enter key to end the procedure

Hinweis:

C

●If your Gigaset 1054 is only being operated on one external telephone line (L1), all authoriza- tions for the second line (L2) should be programmed for “internal.”

63