Siemens 1054 operating instructions 12345678

28.10.96

1054K03.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Putting Into Service Standard Mobile Unit

Registering a Standard Mobile Unit at the Base Station

Every additional mobile unit acquired must first be registered at the base station.

For this, follow these steps:

1.The mobile unit must be switched off

If necessary, turn it off by pushing the

u key until the display on the screen goes off.

2.	Push the registration key on the base station.	Registration key
	Please use an object with a
	sharp point (e.g. pencil, ballpoint pen).
	The registration key will blink.
3.	Next (within 1 minute) on the mobile unit:

The mobile unit must be switched off.

Press the 1 and

ohold it down.

(This is done to stipulate the base station number)

uIn addition, push the ON key until the display appears on the screen.

1-

C

o

#

!... (

Enter the system code. At the time of delivery, the system code is set as 0000.

Complete entry of the system code.

Please wait until the connection to the base station is established.

All of the non-assigned internal station numbers appear on the screen; shown here, 1 to 8.

Enter the desired internal station num- ber for the mobile unit, i.e. push one of the number keys between 1 and 8; here, for example, 2 is pushed.

The mobile unit is registered.

If the display of the base number is acti- vated, you will now see the base num- ber.

1---

C

1

C

12345678

ACD

C

Note:

●Up to 8 mobile units can be registered on one base station.

●If 8 mobile units are already registered, three dashes appear when the system code is entered during the registration procedure; a negative acknowledgment tone sounds.

●To deactivate mobile unit, see page 72.

19