80
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96 1054K07A.FM
Operation with Comfort Mobile Unit Standard Settings
For your own protection, you can enter a new four-digit system code for the system. This pro-
tects your settings and prevents registration of additional mobile units.
All entries are carried out from a mobile unit. At the time of initialization, the system code is set
at “0000“.
The Comfort mobile unit is in idle status.
Push this key; main menu appears..
Scroll with NEXT ...
Until “Service“ appears in the 1st line of the
main menu and ...
select “Service” with OK .
The next menu level appears.
Scroll with NEXT...
until “System settings” appears in the 1st
line of the menu and
then select with OK.
Enter the four-digit system code
if necessary, correct with .
Scroll with NEXT...
until “Change sys. code” appears in the 1st
line
and then select with OK.
Enter new system code, please be sure to
note this number!
Every digit entered replaces one dash
if necessary, correct with .
Complete the entry.
Repeat the new system code.
Every digit entered replaces one dash..
Push this key to complete the entry.
Note:
●If you have entered an erroneous system code, a negative acknowledgment tone will be
signalled.
●If you forget the system code, it will be necessary to disassemble the device. Forgetting the
system code is like losing a key. If this happens, please get in touch with your vendor.
Enter / Change System Code
a
ß
Telephone book
Number redial
OK
Telephone lock
NEXT
Service
- - - - - - - -
OK
Telephone book
NEXT
Service
System settings
Change Sys. code
Forwarding ON
Cancel registr.
OK
System settings
NEXT
System code
Enter:
* * _ _
OK
System settings
- - - - - - - -
OK
Call Forward. ON
NEXT
Sys cd/Mn sys cd
Duration/Units
OK
Call barring
NEXT
o Enter
new sys.code:
4 7 _ _
OK
OK
oRepeat
new sys. code:
* * _ _
OK
OK