56
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96 1054K06.FM
Operation with Standard Mobile Unit Call Charges, Call Length
If this feature is activated (the call charge display must also be activated), the charges for the pre-
vious call are shown after the line is seized. This is ideal, for instance, for hotels or inns which
wish to see the call charges for a guest. For resetting options for the charges, see “Delete Call
Charge Total” on page 57.
w#!o Push these keys in sequence and then
enter the system code.
Every digit entered replaces one dash
on the screen.
00 for both telephone lines
z*0 Push these keys in the sequence shown
.
1or =Push the 1 to activate.
Push 0 to deactivate.(initialization status)
wPush enter.
If the units / charge display is activated, the mobile unit automatically shows the units. If you
want to see the charge, you must enter the charge factor. The charge factor is valid for all ter-
minal devices connected to Gigaset 1054.
w#("o
Press these keys in the sequence
shown here. Then enter the system
code. Every entry replaces one of the
dashes.
The current setting is shown;
here, 0.00
oEnter the call charge factor (for example,
.12).
Pushing the star key allows the decimal
point to be displayed or not displayed.
wPush the enter key.
Note:
If the call charge factor is entered or changed, all previous individual / total entries are deleted. In
order to view the charge factor, follow the procedure, deleting the step “Enter call charge fac-
tor.”To display the units again, enter “0.00” as charge factor. The charge factor can be program-
med up to 9.99 or 999, and is valid for all stations.
Call Charge Display of Previous Call: Activate / Deactivate
Call Charge Factor: Viewing or Setting
A
C
D
1____
A
C
D
1__
A
C
D
012
A
C
D
n
0 0
C
A
C
D
8____2
A
C
D
0.00
A
C
D
0.12
C