Display of Charges / Display of Call Length | Siemens 1054 specs

28.10.96

1054K07B.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit	Charges, Call Length

Display of Charges / Display of Call Length

You can use any mobile unit to view the total charges as well as the charges for the most recent call. The charge total includes only the charges occurring on that particular mobile unit. The set- ting of the unit cost is described on pages 108 and 109.

The setting for all mobile units and auxiliary devices -- whether for call length, units, or charges -- is carried out on the mobile units. In addition, you can stipulate whether the previously-incurred call charges or units should be displayed before the beginning of the call.

The charges per mobile unit or auxiliary device and the total call charges for all devices can also be deleted, using the mobile unit.

Display of Units

(Unit cost=0)

Display of units remains visible for about 4 seconds after the end of the call.

Display of cost in DM

(Unit cost >0)

Display of cost remains visible for about 4 seconds after the end of the call.

Display of Call Length

External 1

0000026 00008

MUTE		CONSLT.

0000026 00008

Total Individual

External 1

23.07 2.07

MUTE		CONSLT.

23.07 2.07

Total Individual

If the call length recording feature is activated, the recording begins immediately upon connec- tion of the call.

Display:

After the connection is terminated, the call length display clock stops; it remains visible on the display for about 4 seconds.

00:07:59

Hours

Minutes

Seconds

107

Image 113

Siemens 1054 Operation with Comfort Mobile Unit Charges, Call Length, Display of Charges / Display of Call Length

Contents

Gigaset 28.10.96 1054TIT.FM Gigaset 1054 A30852-X954-B101-1-7619 Table of Contents Switching Features Operation with Standard Mobile Unit Standard SettingsIncoming Calls Outgoing Calls Mobile Unit Settings System SettingsOperation with Comfort Mobile Unit Using the Menu Lock Telephone Book Switching FunctionsCharges, Call Length Operation with Auxiliary Device Outgoing Calls Acoustic Signalling Using the FeaturesMulticell System Operation on Telephone Systems Standard Mobile Unit Table of Contents About the Operating Instructions IntroductionAbout this Device Rear Overview FiguresFront Registration Key to register the mobile units Comfort Mobile Unit 1000C Standard Mobile Unit 1000S Important Tips Safety Precautions Putting Into Service Recommendation Step by Step Instructions Special Accessories Putting Into Service Base Station GigasetContents of Package Installation Site / Selection of the Mounting Site Range Mounting / Connecting the Base Station Connections for Gigaset Specifications for Wall Mounting Status of the Base Station Upon Delivery Connection Options at the Base Station Installing and Charging the Rechargeable Batteries Putting Into Service Mobile UnitInstalling the batteries in the mobile unit Tips for Individuals with Hearing Aids Mobile Unit Gigaset 1000S Gigaset 1000C Mounting the Carrying Clip on the Mobile Unit Symbol Explanation Putting Into Service Standard Mobile UnitSymbols Explanation UUPzAH On OFF, Lock Status Zzzz Switching from OFF status Switching the Status Switching from on statusSwitching from Lock status You will hear the key acknowledg- ment tone 12345678 012 Viewing and Setting the Dialing ModeDetermining the Dialing Mode of Your Telephone Graphic Explanation Putting Into Service Comfort Mobile UnitDisplay OFF ON, OFF, Lock Status You will hear the key acknowledgment tone Registration key Viewing Your Own Internal Number At initialization, your telephone is set for tone dialing Determining the Dialing Mode of Your Telephone Connection Connecting Non-Cordless Devices other than telephones Putting Into Service Non-Cordless DevicesConnection Jacks Can be connected Internal station no Register on system as KL1/KL2 Connection Points for the TFE Adapter Box Please note for door interphone adapter TFE/V Connection Examples for Door Interphones via TFETip Saving / Changing the System Code Operation with Standard Mobile Unit Standard SettingsBe sure to note this Every digit entered replaces one of the first 4 dashes Enter / Change Mobile Unit PIN Procedure is complete New mobile unit PIN is storedPush the 8 key Enter the previously-set mobile unit Pitch Setting Tone Ring of the Mobile Unit Volume 012 N3 2 Current settings are shownActivate / Deactivate Automatic Line Seizure To activate, push the 1 key status at initialization Every digit entered replaces one dash on the screen Activate / Deactivate Call Pickup Operation with Standard Mobile Unit Incoming Calls Call Pickup CD F 123456 1123456 External Dialing, Using DialpadOperation with Standard Mobile Unit Outgoing Calls Automatic line seizure is not pro- grammed 123456 0123456 Using the Dialpad for External Dialing as En-Bloc DialingAutomatic Line Seizure Programmed Automatic Line Seizure Not Programmed 12345678 34567890 034567890 112345678Number Redial Number Redial as En-Bloc Dialing Internal Dialing with Collective Call 236Internal Call to Another Mobile Unit or Auxiliary Device Finding and Dialing Speed Dial Numbers Dialing Speed Dial NumbersDirect Dial of Speed Dial Numbers Phone number stored at that memory location is dialed Placing a Call on Hold Operation with Standard Mobile Unit During the CallPlacing an Internal Call on Hold Station number of the internal sta- tion and INT blink Operation with Standard Mobile Unit During a Call Dialing mode is changed to tone dialing Temporary Switch to Tone Dialing Operation with Standard Mobile Unit Speed Dial 333333Speed Dial Numbers Storing, Viewing or Changing Confirm Stored Telephone Number Delete Speed Dial Numbers Operation with Standard Mobile Unit Speed Dialing 0123 Operation with Standard Mobile Unit Switching Features Or Terminate External Consultation 234567890External Consultation 2345678 Way Conference from Within an Internal Consultation Call Way ConferenceTerminate 3-Way Conference Way Conference from Within an External Consultation Call Deactivate Internal Call Forwarding 91 7Activate Internal Call Forwarding Connection with the Door Interphone Operation with Standard Mobile UnitSwitching Features Display of Call Length Activate / Deactivate 00-00#!o 1or 0 To activate, push the 1 key initialization status 000598 2346.207Every digit enters replaces one dash on the screen Examples Call Charge Display Push 0 to deactivate.initialization status Call Charge Factor Viewing or SettingCall Charge Display of Previous Call Activate / Deactivate Call Charge Totals per Internal Station View / Delete #§o N12 33.00View Total Charges Delete Charge Total 00 0 N12 012 90 3Call Charge Totals per Telephone Line View / Delete View the Total Charges Lock for Outgoing Calls System Lock Activate / Deactivate Operation with Standard Mobile Unit Lock#$o To deactivate, push the 0 key initialization status 112 110Emergency Numbers Store / View #%o Barred Numbers Store 0190Viewing Or Enter Barred Number Activate / Deactivate Barred Numbers 01234List of the registered stations is dis- played Delete Barred Numbers 012 N1 2 Every digit entered Locking the Mobile Unit / Activate HotlineReplaces one dash on the screen Example View Hotline Number View / Delete / StoreOr delete Or enter Hotline number is dialed Dial Hotline Number Mobile unit is lockedUnlock Mobile Unit Mobile unit is locked Display without hotline number or With hotline number Operation with Standard Mobile Unit System Settings Group Call with Call Diversion Pickup Ring Allocation for External CallsCollective Call Ring Allocation Enter or Change Collective Call Group 012 N2 1 N2 1 0123 Ring Allocation Enter or Change Group Call 012 N2 2 N2 2 012 Call group Ring Allocation for the Door Interphone Cancel registration Mobile Unit012 123 Does not change Resetting the Base Station to the Status at InitializationResets to initialization Deletes Status Operation with Standard Mobile Unit Mobile Unit Settings Range Alarm Tone Activate / Deactivate Battery Alarm Tone Activate / DeactivatePress the 1 to activate initialization status Press the 0 to deactivate Resetting the Mobile Unit to Initialization Status Entire Menu Operation with Comfort Mobile Unit Using the MenuUsing the Dialog Keys Equip. data Menu Structure for System SettingsIdle State Example 1 In Internal Call Status-Dependent MenusMenu appears Entire menu at left Example 2 External Consultation in External Call Repeat the new system code Operation with Comfort Mobile Unit Standard SettingsEnter / Change System Code Set Tone Ringing for Mobile Unit Set Dialog Language Next OK Save OFF Activate / Deactivate Automatic seizure for Internal Station Push the F-keymain menu appears Operation with Comfort Mobile Unit Incoming Calls If Automatic line seizure see page 84 is activated You will hear the external call and can accept it Or set up a 3-way conferenceAnswer a Call Waiting During an External Call Second call is terminated thereby External Dialing with Dialpad Operation with Comfort Mobile Unit Outgoing CallsAutomatic Line Seizure Activated Initialization Status No Automatic Line Seizure Activated Mobile Unit not Fully Trunk Authorized Telephone Line is Busy Automatic Line Seizure Activated External En-Bloc Dialing with DialpadIt is displayed in an enlarged form here No Automatic Line Seizure is Activated Or a Play herePhone number is shown on the screen here Phone number is dialed Calling You carry on the internal call Internal Dialing to Another Mobile Unit or Auxiliary Device@...9 Entering Letters Dialing from the Telephone Book Call on Hold Operation with Comfort Mobile Unit During the CallInternal station 5 is then placed on hold Place External Call on Hold At the time of initialization, tone dialing is pre-set 12345678 Or Change Handset Volume Change Handset VolumeMute Function Mute On Operation with Comfort Mobile Unit Telephone Book Entries are sorted alphabetically in the tele- phone book Dialing Convenience with the Telephone BookEditing the Telephone Book Next Delete Entry is deleted Internal Consultation / Transfer of Call Operation with Comfort Mobile Unit Switching FunctionsActivate Internal Consultation Transfer Call OKThe first external station is now reconnec- ted with you External Consultation / Transfer CallActivate External Consultation Toggle Between External Stations Toggle with Internal and External StationsTerminate Toggle Press this to terminate toggle Internal Call Parallel to an External Consultation External Call Parallel to an Internal ConsultationExternal Call Parallel to an External Consultation Or e Original external call Activate/ Deactivate Internal Call Forwarding Menu for setting the system functions appears Connection to the door interphone remains Connection to the Door InterphoneYou are connected to the door interphone Display of Charges / Display of Call Length Operation with Comfort Mobile Unit Charges, Call LengthDisplay of Units Display of cost in DM Main menu appears INT1 Lock to Prevent Outgoing Calls / Emergency Numbers Operation with Comfort Mobile Unit Lock Delete all Acknowledgment appears for 2 sec- onds Delete All Barred Numbers Set the COS for Internal Stations Lock Mobile Unit /Change Hotline Number / Mobile Unit PIN Cancel Registration of Mobile Unit Lock UnlockSelect Lock OFF within 3 seconds, using OK Push the F-key,the main menu appears Operation with Comfort Mobile Unit System SettingsFirst Steps for System Settings Set Cordless Station Connections Set Connection Configuration for Internal StationsSet Non-cordless Station Lines a/b lines Setting is displayed for 2 seconds Resets to Deletes Unchanged Status at initialization External Allocated Telephone line Internal station Set / Change Ring Allocation and Ring Cycles Set / Change the Number of Rings for Group Call Push the F key main menu appears Cancel Registration for Mobile Unit Activate / Deactivate Advisory and Alarm Tones Operation with Comfort Mobile Unit Mobile Unit Settings General Operation with Auxiliary Device Outgoing CallsYou will hear the internal dial tone You will hear the trunk dial tone Connection is terminated Phone reverts to pulse dialing Operation with Auxiliary Device Incoming Calls Or you can set up a 3-way conference callYou have picked up the external call Answer Call Waiting Push these keys to place the call on hold Call forwarding is activatedInternal call forwarding is deactivated Operation with Auxiliary Device Switching Functions You can continue with the original call Toggle with a Telephone with Pulse DialingToggle with a Telephone with Tone Dialing You can now continue with the original call You are now connected with the door interphone Tips for Operation Multicell SystemOrganization of Base Stations and Mobile Units At the time of initialization, the system code is set at Multicell System Standard Mobile UnitThen within 1 minute on the Mobile Unit = Automatic registration is activated. . The 0 blinks Base Station Selection, Automatic / Manual / CombinedNumber entered will blink here Combined Selection of the Base Station Display of the base station here Activate / Deactivate the Base Station NumberPush the 0 to deactivate. Status at initialization Register Comfort Mobile Unit on Multiple Base Stations Multicell System Comfort Mobile Unit Multicell System Comfort Mobile Unit Base Stations Selection Automatic / Manual / Combined Thereafter Operation on Telephone Systems Standard Mobile Unit Enter Main Trunk Code Hakz Every digit entered replaces one dash on the display Setting is saved AKZ / Hakz is / are deleted Deleting AKZ and Hakz #!o Set the Time for F Seconds 25 §%Setting at initializ ThenSet / Change Time for Flash Enter the Trunk Code AKZ Operation on Telephone Systems Comfort Mobile Unit 12345 Operation on Telephone Systems Using the Features12345u 12345u34567 Or Switch the Call Example Setting Up a Consultation with Comfort Mobile UnitYou are engaged in a consultation call Terminate Consultation Acoustic Signalling General Information Error Possible Cause What To Do Tips for Troubleshooting Contact Partners WarrantySiemens Service Germany-wide telephone number 0180 5333 Connection Configuration Glossary TC System Park Unpark a CallStation LED Index Hold 43, 95 Register Mobile unit Quick Reference Operating Instructions Standard Mobile Unit Standard Mobile Unit in Operation Accepting a Call Setting Tone Ring PitchDialing an External Telephone Number Dialing an Internal Telephone Number External Consultation during an External Call Internal Consultation during an External CallForwarding an External Call to an Internal Station Accepting a Call Waiting Call Quick Reference Operating Instructions Comfort Mobile Unit Setting the Handset Volume during a Call Dialing an Internal Telephone Numberpage Setting the Tone Ring VolumeComfort Mobile Unit in Operation Accepting a Call Dialing the Telephone Number from the Telephone Book Storing the Telephone Number and Name in the Telephone Book Quick Reference Operating Instructions Auxiliary Device Toggle page 128 Telephone with Tone Dialing Toggle page 128 Telephone with Pulse Dialing Siemens Aktiengesellschaft