Siemens 1054 operating instructions Set / Change Ring Allocation and Ring Cycles

28.10.96

1054K07C.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit System Settings

Set / Change Ring Allocation and Ring Cycles

For more information about this, see page 118.

If more than 6 cordless stations are in operation, the telephone number of an incoming call is dis- played only at the first five stations. The stations which were the last to be registered are affec- ted by this.

1.In idle status, push the ßkey and select “Service” from the main menu.

2.In the Service menu, select “System settings” and enter the system code (see page 115).

Line data

External 1/2

Call data

Ring allocation

Act: Coll.call

New: Group call

- - - - - - - -

After the correct system code is entered, the following display appears:

Scroll, using NEXT...

until “Line data” appears on the 1st line; then select with OK.

Scroll with NEXT in order to choose the external telephone line for which the ring allocation is to be set; for example, External 1...

and select with OK.

Scroll with NEXT in order to select “Call data”

and confirm with OK

Select “Ring allocation” with OK.

The menu to edit the ring allocation appears (entire menu at left.

Using NEXT / OK, you can select and edit the following options

:

Sys cd/Mn sys cd

Duration/Units Call barring

NEXT OK

External 1

External 2

NEXT OK

Pause times

Dial data Call data

NEXT OK

Ring allocation

No. ring cycles Delay ring end

NEXT OK

Act.: Coll.call

New: Group call

----------------

NEXT OK

Collective call

Enter / change collective call.

After “Collective Call” is selected, the col- lective call list is displayed.

Group call

Enter / change group call

After “Group call” is selected, the call list is first displayed for group 1 and then for group 2..

Call user group1 1 2 3 _

SAVE

Continued

119