Siemens 1054 operating instructions External Allocated Telephone line Internal station

28.10.96

1054K07C.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit System Settings

Ring Allocation for External Calls

Using the ring allocation (allocation to telephone numbers), you can stipulate which mobile units or auxiliary devices should be signalled when an external call comes in. The ring allocation is car- ried out by entering the internal numbers in the list of the collective call group or group call list.

For stations which are designated to receive external calls, the COS “Incoming authorization” or higher must be set (see „Set the COS for Internal Stations“ on page 113).

Up to 10 stations, of which 9 can be mobile units, can be entered in the lists for group call or call diversion pickup.

Call waiting is signalled at stations engaged in an external or internal call (see page 88).

Collective Call

●At the time of initialization, collective call is set for all stations.

●An incoming external call is signalled at all registered mobile units and auxiliary devices and can be picked up by any mobile unit or auxiliary device.

●By programming only one station into the collective call group, it is possible to have the calls routed to one individual station.

●Groups of stations which are part of the collective call

At the time of registration, the station is automatically placed in the collective call group. This can be changed later.

Example:
External	Allocated
telephone line	internal station
1	1
2	2, 3, 4

Group Call with Call Diversion Pickup

●An incoming external call is first signalled 3 times on the mobile units of the first call group and can be picked up there. If no mobile unit in this group picks up the call, the second call group is automatically signalled.

Example:
External	Allocated internal stations		Signal at
telephone line	Group 1	Group 2	(after call diversion)
1	2, 3	6, 7	2, 3, 6, 7
2	1	4, 6	1, 4, 6

118