Siemens 1054 operating instructions 012, Viewing and Setting the Dialing Mode

28.10.96

1054K03.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Putting Into Service Standard Mobile Unit

Viewing and Setting the Dialing Mode

The German Telekom AG offers two different dialing modes for telephone connections:

●Dial pulsing system (Dial Pulsing System = DPS)

●Dual-tone (multifrequency system = DTMF)

A the time of initialization, your new telephone is set for tone dialing.

Tone dialing (DTMF) is, however, only possible if your telephone lines are connected to a new digital switching exchange. The German Telekom AG has, however, not yet completely finished converting all telephone lines in Germany to digital switching exchanges.

Determining the Dialing Mode of Your Telephone:

Push the connect key and then dial any digit (for example, 2).

If you then still hear the same dial tone, you will have to switch the dialing mode.

w# Push the memory key followed by the # key. This opens the memory.

1Push the 1 key.

This activates the procedure.

oEnter the system code.

Every digit entered replaces one dash.

1“ Select external telephone line 1 or 2.

zPush the repeat dial key.

-

ACD

1____

ACD

1 _

A CD

012

ACD

A CD

DPS

0§§ Push the keys 0, 3, 3..

03 3

A CD

Tone Dialing, Signal Key Flash for Telephone Systems (Setting the Flash, see page 141)

0§/ Push the keys 0, 3, 7.

03 7

A CD

Tone Dialing, Signal Key Flash (length/250 ms) for Telephone Service on

Main Connection (status upon delivery)

03 8

0§( Push the keys 0, 3 , 8. A CD

wPush the memory key.

The dialing mode is now programmed.

C

20