28.10.96

1054K01.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Important Tips

Safety Precautions

For your safety and protection, do not use the base station or mobile units in bathrooms or showers (damp areas); the telephones are not waterproof.

Warning

Use only approved rechargeable Nickel Cadmium batteries (NiCd) (See “Important Information about Using the Battery Cells,” page 15).

Never use other rechargeable battery cells or normal (non-rechargeable) batteries. These might short circuit or destroy the battery casing (dangerous). Follow the instruc- tions found on the labels in the battery compartments of mobile units and charging units.

The symbols on these labels state :

– Use only the type listed in the operating instructions

(See chapter “Inserting and Loading the Batteries“, page 14)

–Use only rechargeable batteries and in the polarity shown.

+ _

Do not immerse batteries in water, and do not expose them to fire.

Do not dispose of old defective batteries in your normal household trash.

Batteries become warm while charging; this is normal and does not represent a danger.

Do not use charging units from other manufacturers, since these could damage the batteries.Supplemental charging units can be ordered from Siemens.

Use only the AC adapter delivered with your device, bearing the number C 39280-Z4-C65.

Connected non-cordless auxiliary devices (telephone, fax, door interphone...) which have exposed metal parts might temporarily conduct abnormally high voltage, for instance during an electrical storm, and should not be touched.

The mobile unit must not be operated in environments where there is danger of explosion.

CE Mark of Approval and Certification for the Main Connection and Telephone Systems

The Federal Agency for Telecommunication Certification (”Bundesamt für Zulassungen in der Telekommunikation“) has issued the BZT certification for this telephone system. It has been approved in line with the EU Guidelines 91/263/EWG, Telecommunication Devices.

This telephone system fulfills the requirements set forth in the EU Guidelines:

89/336/EWG “Electromagnetic Compatibility“

73/23/EWG “Electrical Resources for Use within Certain Voltage Limitations“

The CE identification mark certifies the device’s conformity with these guidelines.

6

Page 12
Image 12
Siemens 1054 operating instructions Important Tips, Safety Precautions