Activate / Deactivate Advisory and Alarm Tones | Siemens 1054

28.10.96

1054K07C.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Comfort Mobile Unit	Mobile Unit Settings

Activate / Deactivate Advisory and Alarm Tones

ß

Tones

Key click Batt.warn.tone Range tone Acknowldg tone Error tone Synchr. tone

- - - - - - - - - - - - -

Push the F key; the main menu appears.

Scroll through main menu with NEXT until ...

“Tones“ appears in the 1st line; select with OK.

The menu to set the tones appears (com- plete menu at left).

Using NEXT / OK, you can select the follo- wing options, and activate or deactivate them:

Telephone Book

Redial Telephone lock

NEXT		OK

Key click

Batt.warningtone Range tone

NEXT		OK

Key click

o

Acknowledgment tone is signalled when key is pushed.

The current status of key click is shown; here it is deactivated.

After pushing ON, you can choose between

deactivate and activate.

	Key click
ON	OK

Key click
OFF	SAVE

The following settings are made in the same manner as the settings which are described above.

Batt.warningtone

Rechargeable batteries are almost empty .

Range tone

The radio range limit is reached

Acknowledg. tone	Successful completion of a procedure (positive acknowledgment tone)..

Error tone

Alarm tone for error in operation (negative acknowledgment tone).

Synchr.tone

Synchronization tone,

The mobile unit is successfully connected (radio connection) with a base station.

122

Image 128

Siemens 1054 Operation with Comfort Mobile Unit Mobile Unit Settings, Activate / Deactivate Advisory and Alarm Tones

Contents

Gigaset 28.10.96 1054TIT.FM Gigaset 1054 A30852-X954-B101-1-7619 Table of Contents Operation with Standard Mobile Unit Standard Settings Switching FeaturesIncoming Calls Outgoing Calls System Settings Mobile Unit SettingsOperation with Comfort Mobile Unit Using the Menu Lock Switching Functions Telephone BookCharges, Call Length Operation with Auxiliary Device Outgoing Calls Using the Features Acoustic SignallingMulticell System Operation on Telephone Systems Standard Mobile Unit Table of Contents About the Operating Instructions IntroductionAbout this Device Rear Overview FiguresFront Registration Key to register the mobile units Standard Mobile Unit 1000S Comfort Mobile Unit 1000C Safety Precautions Important Tips Putting Into Service Step by Step Instructions Recommendation Special Accessories Putting Into Service Base Station GigasetContents of Package Installation Site / Selection of the Mounting Site Mounting / Connecting the Base Station Range Specifications for Wall Mounting Connections for Gigaset Connection Options at the Base Station Status of the Base Station Upon Delivery Putting Into Service Mobile Unit Installing and Charging the Rechargeable BatteriesInstalling the batteries in the mobile unit Tips for Individuals with Hearing Aids Mounting the Carrying Clip on the Mobile Unit Mobile Unit Gigaset 1000S Gigaset 1000C Putting Into Service Standard Mobile Unit Symbol ExplanationSymbols Explanation UUPzAH Zzzz On OFF, Lock Status Switching the Status Switching from on status Switching from OFF statusSwitching from Lock status You will hear the key acknowledg- ment tone 12345678 012 Viewing and Setting the Dialing ModeDetermining the Dialing Mode of Your Telephone Graphic Explanation Putting Into Service Comfort Mobile UnitDisplay ON, OFF, Lock Status OFF You will hear the key acknowledgment tone Registration key Viewing Your Own Internal Number Determining the Dialing Mode of Your Telephone Connection At initialization, your telephone is set for tone dialing Putting Into Service Non-Cordless Devices Connecting Non-Cordless Devices other than telephonesConnection Jacks Can be connected Internal station no Register on system as Connection Points for the TFE Adapter Box KL1/KL2 Please note for door interphone adapter TFE/V Connection Examples for Door Interphones via TFETip Operation with Standard Mobile Unit Standard Settings Saving / Changing the System CodeBe sure to note this Every digit entered replaces one of the first 4 dashes Procedure is complete New mobile unit PIN is stored Enter / Change Mobile Unit PINPush the 8 key Enter the previously-set mobile unit Setting Tone Ring of the Mobile Unit Volume Pitch Current settings are shown 012 N3 2Activate / Deactivate Automatic Line Seizure To activate, push the 1 key status at initialization Activate / Deactivate Call Pickup Every digit entered replaces one dash on the screen Operation with Standard Mobile Unit Incoming Calls CD F Call Pickup 123456 External Dialing, Using Dialpad 1123456Operation with Standard Mobile Unit Outgoing Calls Automatic line seizure is not pro- grammed Using the Dialpad for External Dialing as En-Bloc Dialing 123456 0123456Automatic Line Seizure Programmed Automatic Line Seizure Not Programmed 112345678 12345678 34567890 034567890Number Redial Number Redial as En-Bloc Dialing Internal Dialing with Collective Call 236Internal Call to Another Mobile Unit or Auxiliary Device Dialing Speed Dial Numbers Finding and Dialing Speed Dial NumbersDirect Dial of Speed Dial Numbers Phone number stored at that memory location is dialed Operation with Standard Mobile Unit During the Call Placing a Call on HoldPlacing an Internal Call on Hold Station number of the internal sta- tion and INT blink Operation with Standard Mobile Unit During a Call Temporary Switch to Tone Dialing Dialing mode is changed to tone dialing 333333 Operation with Standard Mobile Unit Speed DialSpeed Dial Numbers Storing, Viewing or Changing Confirm Stored Telephone Number Operation with Standard Mobile Unit Speed Dialing Delete Speed Dial Numbers Operation with Standard Mobile Unit Switching Features 0123 Or Terminate External Consultation 234567890External Consultation 2345678 Way Conference Way Conference from Within an Internal Consultation CallTerminate 3-Way Conference Way Conference from Within an External Consultation Call Deactivate Internal Call Forwarding 91 7Activate Internal Call Forwarding Operation with Standard Mobile UnitSwitching Features Connection with the Door Interphone 00-00 Display of Call Length Activate / Deactivate#!o 1or 0 To activate, push the 1 key initialization status 2346.207 000598Every digit enters replaces one dash on the screen Examples Call Charge Display Push 0 to deactivate.initialization status Call Charge Factor Viewing or SettingCall Charge Display of Previous Call Activate / Deactivate N12 33.00 Call Charge Totals per Internal Station View / Delete #§oView Total Charges Delete Charge Total N12 012 90 3 00 0Call Charge Totals per Telephone Line View / Delete View the Total Charges Operation with Standard Mobile Unit Lock Lock for Outgoing Calls System Lock Activate / Deactivate#$o To deactivate, push the 0 key initialization status 110 112Emergency Numbers Store / View #%o 0190 Barred Numbers StoreViewing Or Enter Barred Number 01234 Activate / Deactivate Barred NumbersList of the registered stations is dis- played Delete Barred Numbers 012 N1 2 Locking the Mobile Unit / Activate Hotline Every digit enteredReplaces one dash on the screen Example Hotline Number View / Delete / Store ViewOr delete Or enter Dial Hotline Number Mobile unit is locked Hotline number is dialedUnlock Mobile Unit Mobile unit is locked Display without hotline number or With hotline number Operation with Standard Mobile Unit System Settings Group Call with Call Diversion Pickup Ring Allocation for External CallsCollective Call 012 N2 1 N2 1 0123 Ring Allocation Enter or Change Collective Call Group 012 N2 2 N2 2 012 Ring Allocation Enter or Change Group Call Call group Ring Allocation for the Door Interphone Cancel registration Mobile Unit012 123 Does not change Resetting the Base Station to the Status at InitializationResets to initialization Deletes Status Operation with Standard Mobile Unit Mobile Unit Settings Battery Alarm Tone Activate / Deactivate Range Alarm Tone Activate / DeactivatePress the 1 to activate initialization status Press the 0 to deactivate Resetting the Mobile Unit to Initialization Status Entire Menu Operation with Comfort Mobile Unit Using the MenuUsing the Dialog Keys Equip. data Menu Structure for System SettingsIdle State Status-Dependent Menus Example 1 In Internal CallMenu appears Entire menu at left Example 2 External Consultation in External Call Repeat the new system code Operation with Comfort Mobile Unit Standard SettingsEnter / Change System Code Set Dialog Language Set Tone Ringing for Mobile Unit Next OK Save OFF Activate / Deactivate Automatic seizure for Internal Station Push the F-keymain menu appears Operation with Comfort Mobile Unit Incoming Calls If Automatic line seizure see page 84 is activated Or set up a 3-way conference You will hear the external call and can accept itAnswer a Call Waiting During an External Call Second call is terminated thereby Operation with Comfort Mobile Unit Outgoing Calls External Dialing with DialpadAutomatic Line Seizure Activated Initialization Status No Automatic Line Seizure Activated Telephone Line is Busy Mobile Unit not Fully Trunk Authorized External En-Bloc Dialing with Dialpad Automatic Line Seizure ActivatedIt is displayed in an enlarged form here No Automatic Line Seizure is Activated Play here Or aPhone number is shown on the screen here Phone number is dialed Calling You carry on the internal call Internal Dialing to Another Mobile Unit or Auxiliary Device@...9 Dialing from the Telephone Book Entering Letters Operation with Comfort Mobile Unit During the Call Call on HoldInternal station 5 is then placed on hold Place External Call on Hold 12345678 At the time of initialization, tone dialing is pre-set Change Handset Volume Or Change Handset VolumeMute Function Mute On Operation with Comfort Mobile Unit Telephone Book Entries are sorted alphabetically in the tele- phone book Dialing Convenience with the Telephone BookEditing the Telephone Book Entry is deleted Next Delete Operation with Comfort Mobile Unit Switching Functions Internal Consultation / Transfer of CallActivate Internal Consultation Transfer Call OKThe first external station is now reconnec- ted with you External Consultation / Transfer CallActivate External Consultation Toggle with Internal and External Stations Toggle Between External StationsTerminate Toggle Press this to terminate toggle External Call Parallel to an Internal Consultation Internal Call Parallel to an External ConsultationExternal Call Parallel to an External Consultation Or e Original external call Menu for setting the system functions appears Activate/ Deactivate Internal Call Forwarding Connection to the door interphone remains Connection to the Door InterphoneYou are connected to the door interphone Operation with Comfort Mobile Unit Charges, Call Length Display of Charges / Display of Call LengthDisplay of Units Display of cost in DM Main menu appears INT1 Operation with Comfort Mobile Unit Lock Lock to Prevent Outgoing Calls / Emergency Numbers Delete all Delete All Barred Numbers Acknowledgment appears for 2 sec- onds Set the COS for Internal Stations Lock Mobile Unit /Change Hotline Number / Mobile Unit PIN Cancel Registration of Mobile Unit Lock UnlockSelect Lock OFF within 3 seconds, using OK Push the F-key,the main menu appears Operation with Comfort Mobile Unit System SettingsFirst Steps for System Settings Set Cordless Station Connections Set Connection Configuration for Internal StationsSet Non-cordless Station Lines a/b lines Resets to Deletes Unchanged Status at initialization Setting is displayed for 2 seconds External Allocated Telephone line Internal station Set / Change Ring Allocation and Ring Cycles Set / Change the Number of Rings for Group Call Cancel Registration for Mobile Unit Push the F key main menu appears Operation with Comfort Mobile Unit Mobile Unit Settings Activate / Deactivate Advisory and Alarm Tones Operation with Auxiliary Device Outgoing Calls GeneralYou will hear the internal dial tone You will hear the trunk dial tone Connection is terminated Phone reverts to pulse dialing Or you can set up a 3-way conference call Operation with Auxiliary Device Incoming CallsYou have picked up the external call Answer Call Waiting Push these keys to place the call on hold Call forwarding is activatedInternal call forwarding is deactivated Operation with Auxiliary Device Switching Functions Toggle with a Telephone with Pulse Dialing You can continue with the original callToggle with a Telephone with Tone Dialing You can now continue with the original call You are now connected with the door interphone Tips for Operation Multicell SystemOrganization of Base Stations and Mobile Units At the time of initialization, the system code is set at Multicell System Standard Mobile UnitThen within 1 minute on the Mobile Unit Base Station Selection, Automatic / Manual / Combined = Automatic registration is activated. . The 0 blinksNumber entered will blink here Combined Selection of the Base Station Display of the base station here Activate / Deactivate the Base Station NumberPush the 0 to deactivate. Status at initialization Multicell System Comfort Mobile Unit Register Comfort Mobile Unit on Multiple Base Stations Multicell System Comfort Mobile Unit Base Stations Selection Automatic / Manual / Combined Operation on Telephone Systems Standard Mobile Unit Thereafter Enter Main Trunk Code Hakz Setting is saved Every digit entered replaces one dash on the display Deleting AKZ and Hakz #!o AKZ / Hakz is / are deleted Set the Time for F Seconds 25 §%Setting at initializ ThenSet / Change Time for Flash Operation on Telephone Systems Comfort Mobile Unit Enter the Trunk Code AKZ Operation on Telephone Systems Using the Features 1234512345u 12345u34567 Example Setting Up a Consultation with Comfort Mobile Unit Or Switch the CallYou are engaged in a consultation call Terminate Consultation Acoustic Signalling General Information Tips for Troubleshooting Error Possible Cause What To Do Contact Partners WarrantySiemens Service Germany-wide telephone number 0180 5333 Connection Configuration Glossary TC System Park Unpark a CallStation Index LED Hold 43, 95 Register Mobile unit Quick Reference Operating Instructions Standard Mobile Unit Setting Tone Ring Pitch Standard Mobile Unit in Operation Accepting a CallDialing an External Telephone Number Dialing an Internal Telephone Number Internal Consultation during an External Call External Consultation during an External CallForwarding an External Call to an Internal Station Accepting a Call Waiting Call Setting the Handset Volume during a Call Quick Reference Operating Instructions Comfort Mobile Unit Dialing an Internal Telephone Numberpage Setting the Tone Ring VolumeComfort Mobile Unit in Operation Accepting a Call Storing the Telephone Number and Name in the Telephone Book Dialing the Telephone Number from the Telephone Book Quick Reference Operating Instructions Auxiliary Device Toggle page 128 Telephone with Pulse Dialing Toggle page 128 Telephone with Tone Dialing Siemens Aktiengesellschaft