38
Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96 1054K06.FM
Operation with Standard Mobile Unit Outgoing Calls
After putting Gigaset 1054 and the standard mobile unit into service, you can generally place
calls with any mobile unit which is switched to ON.
gSeize external line
Push connect key
Automatic line seizure
is programmed (status at initializa-
tion)
Line code (LKZ) of the available tele-
phone line is shown.
Automatic line seizure is not pro-
grammed
You will hear the internal dial tone
!Seize line 1
“or line 2 specifically
=Seize available external telephone line
oEnter the number to be dialed.
This is then shown on the screen;
here, for example, 123456.
To Terminate the Call:
gPush the connect key or place the
mobile unit back in the charging unit.
Note:
If the trunk line is already being used by another internal station, “---” will blink on the screen of
your mobile unit and you will hear the internal busy signal.
External Dialing, Using Dialpad
C
D
C
D
F
1
C
D
F
C
D
F
1
C
D
F
2
C
D
F
1
C
D
F
1123456
C