Siemens 1054 2346.207, 000598, Every digit enters replaces one dash on the screen

28.10.96

1054K06.FM

Gigaset 1054, GBR: A30852-X954-B101-1-7619

Operation with Standard Mobile Unit Call Charges, Call Length

Activate / Deactivate Display of Call Charge or Call Charge Unit

Before you can use this feature, you must first request from the German Telekom AG the transmission of the call charge data, if this service has not already been requested for your phone. However, please note that, for technical reasons, the charges on your telephone bill may differ from those shown on the screen. The Telekom unit counter is always the official indi- cator. The following are recorded:

–Call charges or call charge units for an individual call from the mobile unit,

–Total call charges or call charge units for the mobile unit,

–Total call charges or call charge units per telephone line,

–Total call charges or call charge units for the entire system.

Note: If the call charge / call charge units display is activated/deactivated, the call length display is deactivated.

w#!o

Push these keys in this sequence and then enter the system code.

1____

A CD

!“

z)&

Every digit enters replaces one dash on the screen.

Select external telephone line 1 or 2

.

1 __

A CD

012

A CD

Push these keys in sequence.

.

After digits are entered, the current setting is shown.

96 1

A CD

“or = To activate, push the 2 key To deactivate, push the 0.

wPush the enter key

.

C

Examples

Call Charge Display:

Total of 23.46, with individual call charge of 2.07 for the mobile unit, if call charge factor is set.

Call Charge Unit Display

Total of 598, with 46 individual call charge units for the mobile unit, if call charge factor is 0.00.

2346.207.

CD F

000598 0046

CD F

55